asfenhorse.blogg.se

1. #Qinheng electronics hl 340 usb serial adapter linux install#
2. #Qinheng electronics hl 340 usb serial adapter linux serial#
3. #Qinheng electronics hl 340 usb serial adapter linux drivers#
4. #Qinheng electronics hl 340 usb serial adapter linux code#
5. #Qinheng electronics hl 340 usb serial adapter linux mac#

#Qinheng electronics hl 340 usb serial adapter linux code#

I'm trying to upload code to the Arduino using ino.The actual device I'm using is a clone Arduino Nano device from amazon.I'm using a Raspberry Pi 2 with Raspbian Wheezy installed.

#Qinheng electronics hl 340 usb serial adapter linux serial#

Dynex are a bunch of assholes and haven t published the. Bus 002 Device 006: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter And the whole thing is actually a USB to serial converter, for which Linux will provide the ch341-uart driver and create a new /dev/ttyUSB device.

#Qinheng electronics hl 340 usb serial adapter linux drivers#

This is a PL2303 and from everything Ive read no additional drivers are required. The Device Manager shows under Other Devices PCI Serial Port Properties The drivers for this device are not installed. RTS5129 Card Reader Controller Bus 001 Device 027: ID 046d:c52f Logitech, Inc. Bus 001 Device 007: ID 0bda:0129 Realtek Semiconductor Corp.

Here's what the Makefile looks like for anyone who would like to check it out.

I've tried making a build directory in the /lib/modules/4.1.19-v7+/ directory, but all it does is search for a non-existant Makefile.

After struggling for a while, I solved the problem and decided to write this guide Known Devices that might have this problem: Some Arduinos RS232 to USB serial converter If you happen to have such device, by typing in command lsusb You might see QinHeng Electronics HL-340 USB. Makefile:5: recipe for target 'default' failed Some Arduino / USB Serial Converters use CH341 (or HL-340) which are not installed by the default jetpack. ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter Bus 001 Device. Make: *** /lib/modules/4.1.19-v7+/build: No such file or directory. LED strips with QinHeng Electronics HL-340 USB-Serial adapter not working on linux. Might not be the best place to ask, but probably there are some linux guys. Unfortunately, this didn't work out, and it gave me the following error. I found the driver on this website, and followed the instructions on this github repository. Bug 1527491 NEW QinHeng Electronics HL-340 USB-Serial adapter Pieter Fri, 00:41:38 -0800 Public bug reported: USB serial adapter detected but not working.

#Qinheng electronics hl 340 usb serial adapter linux install#

Of course, for this to be able to work on the Raspberry Pi, I'd need to install the required driver for it. Id 1a86, 7523 qinheng electronics hl-340 usb-serial adapter - new line added bus 001 device 001, id 1d6b, 0002 linux foundation 2.0 root hub bus 002 device 001, id 1d6b, 0001 linux. About 10 of these are computer cables connectors, 4 are integrated circuits, and 3 are graph plotter.

#Qinheng electronics hl 340 usb serial adapter linux mac#

libkmod/libkmod.c:507 kmod_lookup_alias_from_builtin_file:Ĭould not open builtin file '/lib/modules/3.4.39/'ve recently picked up a device that happened to use a CH340 USB chip on it. Conversor Usb A Rs232 Hl340 Serie Windows Mac Linux Nubbeo. I did modinfo ch341 and this returned: libkmod: ERROR. And I think my clone arduino is using this. lsusb Bus 001 Device 007: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter dmesg 3498.830496 usb 1-4.3: new full-speed USB device number 10 using xhcihcd 3498.849076 usb 1-4.3: New USB device found, idVendor1a86, idProduct7523 3498.849101 usb 1-4.3: New USB device strings: Mfr0, Product2, SerialNumber0 3498. Lsusb difference: > Bus 006 Device 002: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter > usb 6-1: new full-speed USB device number 2 using sunxi-ohci > ohci_irq: fullspeed or lowspeed device connect Bluetooth: RFCOMM TTY layer initializedĭmesg difference: > ehci_irq: highspeed device connect uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI The dmesg | grep -i tty command gave me this: $ Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 init=/sbin/init rootwait rootfstype=ext4 panic=10 consoleblank=0 enforcing=0 loglevel=7 My kernel version: Linux orangepi 3.4.39 #46 SMP PREEMPT Wed Nov 9 09:50: armv7l armv7l armv7l GNU/Linux I have tried a lot of things and I am now out of options. My arduino is just running a code where it says every second "Hey" over serial. If compare al the 'ports'(?) (/dev folder) when I am plugged in and when I am not i found that /dev/usbdev6.4 is my arduino. I have just put the USB cable from the arduino into my Orange Pi. I have an Orange Pi Zero running Lubuntu and I want it to communicate with an Arduino (clone).